Show simple item record

dc.contributor.authorWei, Xiaoranen_US
dc.contributor.authorGeng, Guohuaen_US
dc.contributor.authorZhang, Yuheen_US
dc.contributor.editorLuis Gonzaga Magalhaes and Rafal Mantiuken_US
dc.date.accessioned2016-04-26T07:50:50Z
dc.date.available2016-04-26T07:50:50Z
dc.date.issued2016en_US
dc.identifier.issn1017-4656en_US
dc.identifier.urihttp://dx.doi.org/10.2312/egp.20161057en_US
dc.description.abstractThis paper introduces a partition method for printing hollow objects without infill via Fused Deposition Modeling (FDM), which is one of the most widely used 3D-printing technology. We linked the partition problem to the exact cover problem (ECP). Then the hollow objects can be printed without any infill. The experimental results show that our solution can be applied to a variety of models, closed-hollowed or semi-closed, with or without holes, as evidenced by experiments and performance evaluation on our proposed algorithm.en_US
dc.publisherThe Eurographics Associationen_US
dc.subjectI.3.3 [Computer Graphics]en_US
dc.titleNo-infill 3D Printingen_US
dc.description.seriesinformationEG 2016 - Postersen_US
dc.description.sectionheadersPostersen_US
dc.identifier.doi10.2312/egp.20161057en_US
dc.identifier.pages41-42en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record