Search Results

Now showing 1 - 10 of 880
  • Item
    Simulation of Facial Muscle Actions Based on Rational Free Form Deformations
    (Blackwell Science Ltd and the Eurographics Association, 1992) Kalra, Prem; Mangili, Angelo; Thalmann, Nadia Magnenat; Thalmann, Daniel
    This paper describes interactive facilities for simulating abstract muscle actions using Rational Free Form Deformations (RFFD). The particular muscle action is simulated as the displacement of the control points of the control-unit for an RFFD defined on a region of interest. One or several simulated muscle actions constitute a Minimum Perceptible Action (MPA), which is defined as the atomic action unit, similar to Action Unit (AU) of the Facial Action Coding System (FACS), to build an expression.
  • Item
    Dynamic Load Balancing within a High PerformanceGraphics System
    (The Eurographics Association, 1991) Selzer, Harald; A. Kaufman
    Interactive 3D graphics applications require significant arithmetic processing to meet the ever-inreasing desire for higher image complexity and higher resolution in displayed images. This paper describes a graphics processor architecture with a high degree of parallelismconnected to a distributed frame buffer. The architecture can be configured with an arbitrary number of identical, high level programmable processors operating in parallel.Within the architecture an automatic load balancing mechanism is presented whichdistributes the processing load between geometry and rendering section. After the unique features of the architecture are described the load balancing mechanismis analyzed and the increase of performance is demonstrated."
  • Item
    Template-Based Volume Viewing
    (Blackwell Science Ltd and the Eurographics Association, 1992) Yagel, Roni; Kaufman, Arie
    We present an efficient three-phase algorithm for volume viewing that is based on exploiting coherency between rays in parallel projection. The algorithm starts by building a ray-template and determining a special plane for projection - the base-plane. Parallel rays are cast into the volume from within the projected region of the volume on the base-plane, by repeating the sequence of steps specified in the ray-template. We carefully choose the type of line to be employed and the way the template is being placed on the base-plane in order to assure uniform sampling of the volume by the discrete rays. We conclude by describing an optimized software implementation of our algorithm and reporting its performance.
  • Item
    GRAPHIC DISPLAYS IN THE COMPUTER AIDED DESIGN OF LIFT SYSTEMS
    (The Eurographics Association, 1982) Barney, G.C.; D.S. Greenaway and E.A. Warman
    The sizing of lift systems to meet passenger demands is normally carried out in a quantitative way by calculation. Nothing is done to determine the quality of service provided. This paper describes how a computer aided design suite using discrete simulation techniques coupled to extensive graphic displays overcomes these deficiencies.
  • Item
    Constructive Page Description Opening Up the Prepress World
    (Eurographics Association, 1991) Samara, Veronika; Wiedling, Hans-Peter
    Constructive Page Description (CPD) is an overall approach allowing different kinds of data to be exchanged between a variety of systems and manipulated in arbitrary system environments. Fully changeable pages, which keep information for modification as long as necessary, as well as fully assembled pages, ready for the printing process, can be constructed by the use of CPD. Moreover, descriptions of data as well as operations can be distributed, and so allow the use of networking facilities. CPD is thereby very flexible in handling, combining, and exchanging data and operations used in the construction of pages. In sum, CPD helps bridge the gap between the printing and the computer graphics world; it is an approach to lead prepress towards an open system architecture.
  • Item
    Faster Phong Shading via Angular Interpolation
    (Blackwell Publishing Ltd and the Eurographics Association, 1989) Kuijk, AAM.; Blake, E.H.
    One of the most successful algorithms that brought realism to the world of 3D image generation is Phong shading. It is an algorithm for smooth shading meshes of planar polygons used to represent curved surfaces. The level of realism and depth perception that can be obtained by Phong shading is attractive for 3D CAD applications and related areas. However, per pixel computation costs which were too high and/or artifacts, introduced by some of the more efficient evaluation methods and apparent only when displaying moving objects, are major factors mat blocked the common usage of Phong shading in highly interactive applications.In this paper we present angular interpolation for Phong shading planar polygons. Angular interpolation was a method especially designed to meet requirements as imposed by special purpose hardware we developed1, but turned out to be generally applicable. The angular interpolation method appears to be very efficient and reduces artifacts when displaying moving objects. Ideally a shading algorithm imposes no need for subdivision of patches as presented by the solid modelling system. Shading calculation via angular interpolation yields such an ideal algorithm. We will describe two alternative evaluation methods that trade off evaluation cost against level of accuracy. They both can handle light source and view point at arbitrary distances, but differ in level of accuracy. As a consequence these alternative evaluation methods do impose restrictions on the topology of patches and light sources. However, generally, the limitations imposed by these alternative shading methods are much more liberal than the limitations on patch size imposed by the geometry.The most economic evaluation method we present can incrementally compute the colour intensity along a scanline by two additions per pixel. The methods presented are generally applicable and can easily be implemented in hardware.
  • Item
    Algorithm for Clipping Arbitrary Polygons
    (Blackwell Publishing Ltd and the Eurographics Association, 1989) Andreev, Rumen D.
  • Item
    Free-Form Surfaces Modeling by Evolution Simulation
    (Eurographics Association, 1988) Lienhardt, Pascal
    We present in this paper a procedural method for modeling free-form, planar surfaces subdivisions, which allows simulating evolutions of such subdivisions. This method is founded on the common principles deduced from corpuscular phenomena modeling method (particle systems), and method for vegetal trees modeling by simulation of evolution. These principles are : - use of a discrete model, which is a set of basic elements, from which time discretization is deduced, -proper activity of basic elements; these methods consists in simulating the behaviour of these elements; - characterization of modelled object evolution, which is achieved by "functions" associated to basic elements; - priority of topology over geometry. A surface is defined as a set of surface elements, supported by a rooted, planar tree. A surface is initially reduced to a point. Surface evolution characterization and control are exclusively exerted through this tree. This method is applied to image synthesis and animation of natural shapes, especially vegetal shapes.
  • Item
    Modelling and Programming Evolutions of Surfaces
    (Blackwell Science Ltd and the Eurographics Association, 1992) Chen, X.; Lienhardt, P.
    In recent years, a lot of work has been done on modelling natural phenomena and simulating the evolution of natural objects. For instance, procedural methods have been developed for simulating corpuscular phenomena and tree growth. In this paper we present a new procedural method for simulating evolutions of subdivisions of surfaces (i.e. partitions of surfaces into vertices, edges and faces). The representations of topology, embedding and photometry are clearly distinguished in the geometric model used for the representation of such subdivisions and thus, each of these features may be evolved independently (as in natural metamorphoses). Evolutions are achieved by applying topological and embedding operations on the geometric model. Control of these evolutions is based upon the behaviour concept. Behaviours (i.e. sets of operations) are associated with cells of the modelled subdivision. At each step, and for each cell, the corresponding behaviour is applied to the cell. The definition and computation of parameters have been studied, in order to control such evolutions. The method has been implemented and tested with many examples of surface evolutions (mainly evolutions of vegetal surfaces: leaves, flowers). Based on the method, a language has been defined for programming surface evolutions.
  • Item
    Towards a Z-Buffer and Ray-Tracing Multimode System based on Parallel Architecture and VLSI chips
    (The Eurographics Association, 1986) P.Lemy,; W. Strasser
    After the hidden surfaces algorithms for 3D rastergraphics, hardware design isthe main problem, for many applicat ions, such as : Audiovisual animat ions. CADCAM,and simulation.After a short description of our CUBI 7 system (a 3D real-time Z-buffer system),and its CRISTAL module which increases RAY-TRACING computations, we present ourhardware project based on :-Parallel architecture for RAY-TRACING, special effects ; This module is alsouseful for pre-processing the image : (rotations, clipping, perspective transform... ).-A or Z-BUFFER which will be designed on VLSI chips polygon filling will be alsodesigned with pipe-lined chips."